Scanning For New Dab Stations; Station Order; Dynamic Range Control (Drc); Prune Station (Clean The Station List) - Albrecht Audio DR 53 Mode D'emploi

6.4. Scanning for new DAB stations

It is recommended to scan for new available stations from time to time. Especially when you have
moved your radio to a different geographical region.
Go to the MENU and select Full Scan to start a scan. The display will change to 'Scanning...'. A
progress bar will show the progress of the scan and the number of stations found during the scan
will also be displayed.
Alternatively you can select Manual tune if you know the frequency of the desired station.

6.5. Station Order

Select if your station list should be sorted by Multiplex, Alphanumeric or Active order.

6.6. Dynamic Range Control (DRC)

If you are listening to music with a high dynamic range in a noisy environment, you may wish to
compress the audio dynamic range. This makes quiet sounds louder, and loud sounds quieter.
Press MENU and select DRC. There are 3 levels of compression:
• DRC off - no compression. This is the default setting.
• DRC low - medium compression.
• DRC high - maximum compression.
Note: This function is only working correctly if the radio station is supporting this feature.

6.7. Prune Station (clean the station list)

This option removes the DAB stations in the station list that cannot be received in your area
(anymore). These are listed with a '?' prefix.

6.8. DAB Display Information

When listening to a DAB station you can change the information that will appear on the display.
There are several different types of information that are sent by the broadcaster. Repeatedly short
press the INFO button to cycle through the different information options.

6.8.1. DAB-Slideshow

The Albrecht DR 53 is also able to show the DAB slideshow transmitted by the broadcasters. The
pictures shown in the slideshow contain different information from album cover, weather information
or pictures from the broadcasting studio. The content depends on the radio station.
When the slideshow is available you can select between different views by clicking OK repeatedly.
19