Adding To An Existing Sonos System - Sonos BU250 Guide Des Produits

6

Adding to an Existing Sonos System

Once you've got the music playing, you can easily add more Sonos components any
time (up to 32 zones).
If your house has structured (built-in) wiring, you can make a wired connection to
additional ZonePlayers or ZoneBridges. If not, our built-in wireless technology is ideal
for you.
Add a zone
Warning: If you are replacing the ZonePlayer that is currently
connected to your router, first add the new Sonos component to
your music system (steps below). You can then unplug the
current component from your router, replace it with the new one,
and move the original component to a new location.
Choose one of the following options:
1.
• If you are adding a ZonePlayer 120, attach desired speakers. (Power rating
should be at least 75W for 8 Ohm speakers and at least 150W for 4 Ohm
speakers.)
• If you are adding a ZonePlayer 90, connect it to an external amplified device.
• If you are adding a ZoneBridge (purchased separately), attach the power
If you are using speaker wire, use your finger to firmly push the
spring-loaded speaker posts inward to reveal the connection
hole.
If your speakers have banana connectors, you can insert the
plugs directly into the banana jacks on the back of the
ZonePlayer (available in North America only.)
Sonos Bundle 250