Ip Ports And Protocols - Shure ANI4IN Serie Mode D'emploi

System Audio Summing
Networking
Cable Requirements
Cat 5e or higher (shielded cable recommended)

IP Ports and Protocols

Shure Control
Port TCP/UDP Protocol
21 TCP FTP
22 TCP SSH
23 TCP Telnet
53 UDP DNS
67 UDP DHCP
68 UDP DHCP
80* TCP HTTP
443 TCP HTTPS
2202 TCP ASCII
5353 UDP mDNS
5568 UDP SDT (multicast)
57383 UDP SDT (unicast)
8023 TCP Telnet
8180 TCP HTML
8427 UDP SLP (multicast)
64000 TCP Telnet
*These ports must be open on the PC or control system to access the device through a firewall.
†
These protocols require multicast. Ensure multicast has been correctly configured for your network.
See Audinate's website for information about ports and protocols used by Dante audio.
Description
Required for firmware updates (otherwise closed)
Secure Shell Interface
Not supported
Domain Name System
Dynamic Host Configuration Protocol
Dynamic Host Configuration Protocol
Required to launch embedded web server
Not supported
Required for 3rd party control strings
†
Required for device discovery
†
Required for inter-device communication
Required for inter-device communication
Debug console interface
Required for web application (legacy firmware only)
†
Required for inter-device communication
Required for Shure firmware update
Shure Incorporated
Factory De-
fault
Closed
Closed
Closed
Closed
Open
Open
Open
Closed
Open
Open
Open
Open
Closed
Open
Open
Open
27/29