Publicité
Les langues disponibles
Les langues disponibles
A firm bed for the track
The unevenly attached reinforcement strips, which ensure a stable track frame on the one hand
and also contribute significantly to reducing noise, are noticeable in the foundation of the track
bed. An additional reduction in noise is achieved by putting on absorbent caps (Art. No.: 61181)
onto the columns distributed in the sub-base. These absorbent caps prevent the ballast frame
lying directly on the plant plate and consequently the transmission of potential resonances. The
absorbent caps can be fixed with a cyanoacrylate adhesive (fast adhesive) to hold them more
effectively.
GB
Guide for
attaching spike
18
8051251920.indd 18
Reinforcement strips
Levelling for laying
cables
Levelling for laying
cables
Guide for
attaching spike
19.06.2013 10:37:26
Publicité
