Robert Juliat 1013+ Instructions Pour L'utilisateur page 14

CONNECTIONS.
Mains voltage.
- Check the conformity of the power supply unit.
Rating plate 7 : Lamp power.
Lighting unit / Power supply connection.
- Connect the lamp cable
ballast and connector e to the lighting unit.
- Lock the cable C into the cable lock j .
- Place the lamp into position - refer to section A - 11.
- Plug the cable 6 to the mains. If the power is present, the
checklight 1 lights up immediately.
- Engage the automatic breaker 2 .
- Press the switch 4 to "ON" .
WARNING !
- Never open the lamp house's bonnet when the lighting unit
is on.
- Do not change the safety switches.
- Never connect to a dimmable channel.
- Use only when lamp in place.
robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thelle - phone: 33 (0)3.44.26.51.89 - fax: 33 (0)3.44.26.90.79 - www.robertjuliat.fr
TECHNICAL FILE
2500W HMI FOLLOW SPOT
A
i
e
g
h
f
j
C to the connector 5 of the
D
C
8 7
2
4
3
6
DESCRIPTION.
A 1013+ M / (*)BSM - Motorized shutter version.
e - EM HARTING 6 x 35A. power socket.
*f - EM XLR 4 output 0/+10V. (extra)
*g - EM XLR 5 input DATA.
*h - EF XLR 5 output DATA.
*i - Fuse (10,3 x 38 - 2A.).
B Electronique power supply 190/265V - 50/60Hz.
1 - Mains checklight.
2 - 16A automatic breaker.
3 - EEC 10A 250V female socket.
4 - "ON/OFF" switch.
5 - EF HARTING 6 x 32A - 2 latch connector.
6 - Mains cable 3 x 4mm
(Standard version).
Mains cable 3 x 3,31mm
(Noth American version).
7 - Rating plate.
8 - Digital counter display.
C Lamp cable.
2
Cable 7xAWG12 4mm
with 6 x 35A M/F HARTING connectors.
D Analogue fader control (0/+10V).
+
1013 /
+
1013 M / BSM
B, BS, M & BSM
Section A - 9
Electronic
power supply unit.
B
1 5
2 (3m) + P17 32A+E plug
2 (1,50m) without plug
length 3m fitted