Robert Juliat 1013+ Instructions Pour L'utilisateur page 12

CONNECTIONS.
Mains voltage.
- Check the conformity of the power supply unit.
Rating plate 10 : Lamp power.
Lighting unit / Power supply connection.
- Connect the lamp cable
ballast and connector e to the lighting unit.
- Lock the cable C into the cable lock j .
- Place the lamp into position - refer to section A - 10.
- Engage the automatic breaker 3 and check that the protection
4 is well engaged.
- Plug the cable 8 to the mains. If the power is present, the
checklight 1 lights up immediately.
- Engage the automatic breaker 2 .
WARNING !
- Never open the lamp house's bonnet when the lighting unit
is on.
- Do not change the safety switches.
- Never connect to a dimmable channel.
- Use only when lamp in place.
robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thelle - phone: 33 (0)3.44.26.51.89 - fax: 33 (0)3.44.26.90.79 - www.robertjuliat.fr
TECHNICAL FILE
2500W HMI FOLLOW SPOT
A
i
e
g
h
f
j
C to the connector 7 of the
D
C
B
DESCRIPTION.
A 1013+ B - Motorized shutter version.
e - EM HARTING 16 x 16A power socket.
f - EM XLR 4 output 0/+10V. (extra)
g - EM XLR 5 input DATA.
h - EF XLR 5 output DATA.
i - Fuse (10,3 x 38 - 2A.).
B Power supply unit.
1 - Mains checklight.
2 - 6A automatic breaker.
3 - General 25A automatic breaker.
4 - 1A automatic breaker.
6 - Ventilation opening
(DON'T OBSTRUCT THE AIR GAPS).
7 - EF HARTING 16 x 16A - 2 latch connector.
8 - Mains cable 3 x 4mm
(Standard version).
Mains cable 3 x 3,31mm
(Noth American version).
9 - DMX lamp control module :
k - EM XLR5 input DATA.
l - EF XLR5 output DATA.
m - EF XLR5 output DATA luminaire
(
For the connection configurations :
refer to sections A - 17 & 19 ).
10 - Rating plate.
11 - Power supply selector :
208V. 60Hz, 230V. 50Hz & 245V. 50Hz.
Position locked by a screw.
C Lamp cable.
Cable H07 RN-F 19G1,5 mm
with 16 x 16A M/F HARTING connectors.
D Analogue fader control (0/+10V).
+
+
1013 /
1013 B
B, BS, M & BSM
Section A - 7
Power supply unit
(P.S.U.)
2 (3m) + P17 32A+E plug
2 (1,50m) without plug
2 length 3m fitted