Kohler K-2314 Guide D'installation page 4

3. Attach the Tie Bar to the Brackets
Insert the 1/8" bolts through a washer, then insert the 1/8" bolts through the bracket holes closest to
the wall.
Spin the toggle wing nut onto the tip of each bolt.
Place the tie bar on the brackets, aligning the inner holes of the tie bar with holes in front of the
brackets.
Bolt the tie bar down using the flush head bolt, washer, and nut.
1012580-2-D
Flush Head Bolt
Bracket
Washer
Nut
Tie Bar
4 Kohler Co.