shark Rocket UV345CCO Guide De L'utilisateur page 3

(Click)
1. Insert Wand into Floor Nozzle.
2. Insert Handheld Vacuum into wand.
Ensure all connections click securely into place.
s h a r kc l e a n . c o m
ASSEMBLY
1
(Click)
2
OFF
Slide the Power switch
to the appropriate speed
setting.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpets.
UPRIGHT
To clean floors, place foot on nozzle and tilt
handheld vacuum back.
NOTE: All accessories are compatible with both the wand and the handheld vacuum.
SETTINGS
SETTING I
Bare Floor/Small Area Rugs Carpets
The brushroll spins slowly The brushroll spins faster
to clean bare floors and to pick up debris below
delicate area rugs. the surface of your carpets.
CLEANING MODES
ABOVE-FLOOR WITH WAND
Stand the vacuum upright. Step on the foot pedal
and pull the wand up to disconnect it from the
nozzle.
ABOVE-FLOOR HANDHELD
Press the button and lift the handheld vacuum off
the wand.
SETTING II
s h a r kc l e a n . c o m