Publicité
Les langues disponibles
Les langues disponibles
utilisAtioN
3 • Storing and transporting
the appliance
After use, stop your appliance by pressing
on the on/off pedal and unplug it (fig.8).
Stow the cable by pressing the automatic
cable rewind pedal (fig.9). In the upright
position, place the suction unit in the
parking position (fig.10). You can then
carry and store your vacuum cleaner in the
cAre ANd cleANiNg
IMPORTANT Always turn off and unplug
your appliance before maintenance or
cleaning.
1 • Changing the bag
The bag full indicator shows you when
the bag is full or saturated. If you notice
that your vacuum cleaner is less efficient,
select the maximum power and hold the
nozzle off the floor. If the indicator remains
red, replace the bag. open the cover on
your vacuum cleaner (fig.15). remove the
(fig.16-17)
wonderbag
rubbish bin (fig.18).
IMPORTANT Do not reuse the
wonderbag, it is a single use bag
Place a new wonderbag in the bag holder,
using the ring (fig.19). Position the bag and
open it out inside the compartment (fig.20).
Make sure that the bag is in the correct
position before closing the cover.
IMPORTANT Never operate the vacuum
cleaner without a bag.
IMPORTANT Your appliance is equipped
(depending on the model) with a safety
system ensuring that a bag is present
(the lid will not close if you have not
installed a bag).
*Depending on model: this is either equipment specific to certain models or available as an optional accessory.
and dispose of it in a
park position (fig.13). If your appliance is
equipped with the Compact System with
folding tubes:
•
Retract the telescopic tubes
press the «Push» button to open the tube
and fold it.
•
If your appliance is equipped with
CLIP'N'STORE, attach your hose to the
accessory clip for easier storage (fig.12).
2 • Change the HEPA* filter
cartridge or the microfilter*
2.1. change the HepA* filter cassette
ref. Zr 0029 01
IMPORTANT Replace the filtration
system once a year.
The HEPA filter cassette Ref. ZR 0029 01
is available from your dealer or Approved
Service Centres.
•
Open the lid of your vaccuum cleaner
(fig.15). Remove the wonderbag
and then remove the HEPA* filter cartridge
(fig.21)
and dispose of the cartridge in a
dustbin.
•
Fit the new Hepa* filter cassette
(Ref. ZR 002901) in its compartment (fig.23).
•
Put the wonderbag back in place. Check
that the Hepa* filter cassette is fitted
correctly before re-closing the cover.
2.2. change the microfilter* ref. Zr002501
IMPORTANT Change the microfilter once
for every six times the bags are changed
The microfilter Ref. ZR002501 is available
from your retailer or from Approved Service
Centres.
•
Open the cover of your vacuum cleaner
(fig. 15).
•
Remove the Wonderbag (fig. 16), then
remove the Microfilter* cartridge (fig. 21)
which contains the microfilter (10a) ref.
ZR002501 and the foam protection of the
motor (10b)
•
Separate the foam
16
16
gB
(fig.11)
and
(fig.16)
(10b)
from the
Publicité
