MTD Cub Cadet 769-25743 Mode D'emploi page 20

EN
¾ Hold the power tool by insulated gripping
surfaces only, because the cutter blade may
contact hidden wiring . Cutter blades contacting
a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
¾ Check for hidden objects in the hedge, such
as wire fencing, before commencing work .
¾ Hold the hedge trimmer securely with both
hands .
Protection of yourself and others
¾ For safety reasons, children or persons who
are not familiar with the instruction manual
and operation of the hedge trimmer, must not
use it . The minimum age of users may be defined
by local or national legislation.
¾ Do not operate the hedge trimmer when there
are people (especially children) or animals in
the immediate vicinity . Ensure children do not
play with the hedge trimmer.
¾ Stop using the device if persons (especially
children) or animals are nearby .
¾ This device must not be used by children or
persons with reduced physical, sensory or
mental capabilities or with inadequate experi-
ence and knowledge . Likewise persons must
be familiar with this instruction manual before
using the device . The minimum age for using
the device may be specified by local or national
legislation.
¾ Only switch the motor on if your feet and
hands are at a safe distance from the cutting
element .
¾ Always disconnect the device from the power
supply if you are leaving it unattended or
removing a blockage .
¾ Always wear sturdy shoes and long trousers
as well as other appropriate personal protec-
tive equipment (safety glasses, ear defenders,
safety gloves etc .) when working on the hedge
trimmer . Wearing personal protective equipment
reduces the risk of injuries. Do not wear loose
clothing, etc., which could be caught by the cut-
ting tool.
20
Safety information
Before use
¾ Before use, make sure you are familiar with
the hedge trimmer, its functions and operating
elements .
¾ Do not use any hedge trimmer whose switch
is defective and which can no longer be
switched on or off. It must be repaired by a
qualified expert or workshop.
¾ Never use a device with damaged or miss-
ing guards or covers . It must be repaired or
replaced by a qualified expert or workshop.
¾ Before making adjustments to the device or
cleaning it, switch it off and remove the power
pack .
¾ Do not use a hedge trimmer with a defective
or heavily worn cutting element . It must be
repaired or replaced by a qualified expert or
workshop .
Tips for use
¾ Read and observe the operating manual of the
power pack and its charger .
¾ Keep all body parts away from the cutting
blade . Do not attempt to remove grass cut-
tings or hold material to be cut with the blade
running . Only remove jammed grass cuttings
with the device switched off. One moment of
inattentiveness when using the hedge trimmer
can result in serious injuries.
¾ Never leave the hedge trimmer unattended
during breaks and store it in a secure location .
¾ Hold the hedge trimmer parallel to the hedge
when switching on, otherwise there is a risk
of injury .
¾ Also when working maintain a safe distance
relative to the cutting tool .
¾ Wear suitable safety goggles and ear defend-
ers!
¾ Take extra care if you are walking backwards .
Risk of tripping!
¾ Switch the motor off when carrying the device
to or from separate working positions .
¾ Never bypass or manipulate switching mech-
anisms installed on the device (e .g . by taping
the switch to the handle) .
Meaning of the symbols