Intended Use; Operating Controls; Protective Equipment; Using For The First Time - MTD Cub Cadet 769-25743 Mode D'emploi

EN

Intended use

The hedge trimmer is intended solely for the cut-
ting of hedges and bushes in private households. It
can be used to cut the following maximum branch
thicknesses:
- 19 mm with the cutting blade
- 38 mm with the saw function
(power-cutting function)
Any other use is classed as an unintended use.
The user is liable for any damages arising from
unintended use.
Incorrect/abnormal use
This hedge trimmer should not be used in public
facilities, parks, sports grounds, roads etc. nor in
agriculture or forestry.
Identification plate J
The identification plate is located on the casing of
the hedge trimmer.
Note
The label has the status of a certificate. It
must never be altered or obliterated.
Structure
1 Manufacturer
2 Engine speed in rpm
3 Rated voltage, current type
4 Model name
5 Current strength
6 Cutting length
7 Device group
8 CE label
9 Disposal note
10 Caution: read the operating manual
11 Year of manufacture
12 Guaranteed sound level
13 Model number
14 Serial number barcode
15 Serial number
22

Operating controls

Operating controls A
A Handle
B On/off switch
C Lockout switch
D On/off switch on bow-shaped handle
E Bow-shaped handle
F Shield
G Cutting blade
H Saw for power-cutting function
I Protective cover
J Power pack compartment
K Power pack release

Protective equipment

Protective equipment A
Shield [F]
The shield protects your hands ensuring easy cutting
with a good view of the cutting area.
Three-way safety circuit [B], [C], [D]
The hedge trimmer is switched on using a three-way
safety circuit. To switch on the cutting blade, first
push the lockout button [C] forward with one hand,
hold it and press the on/off switch [B] . The other
hand operates the on/off switch on the bow-shaped
handle [D]. The cutting blade stops automatically
when you release the on/off switch or the on/off
switch on the bow-shaped handle.
Using for the first time
Supplementary documentation
Make sure the supplied instruction man-
uals of the charger and the power pack
are available. Please read and under-
stand them before using the device.
Power pack charging
Risk of injuries or material damage
¾ Only charge the power pack using the
charger approved by the manufactur-
er. The designations of the approved
chargers are listed in the enclosed CE
Declaration of Conformity.
Intended use
WARNING!