Checchi & Magli UNIFOX Manuel D'utilisation Et D'entretien page 54

Lifting (UNIFOX DT)
WARNING
During lifting watch out for the load swinging, as
the hook-up point is never perfectly at the centre of
gravity.
Lifting operations must be carried out using suitable
means for the load to be lifted, by qualified and author-
ised personnel in order to safeguard their own safety
and that of the other people involved in the operations.
UNIFOX DT/2
UNIFOX DT/3
UNIFOX DT/4
UN41 0581GN
To lift the work vehicle, proceed as follows.
1) Before lifting check the stability of the harness.
English language
SAFETY INFORMATION CONCERNING HANDLING AND
INSTALLATION
UNIFOX DT/5 UNIFOX DT/6
14
The machine is equipped with lifting plates marked with
appropriate signs.
The illustration shows the points for lifting the work ve-
hicle.
The lifting procedure shown applies for all the work ve-
hicle models specified in the manual.
The UNIFOX DT/5 - UNIFOX DT/6 - UNIFOX DT/7 mod-
els must always be hoisted separately to avoid damage
to the frame and possible injury to persons involved in
the operations.
UNIFOX DT/7
2) Strap up the work vehicle or separate units as shown
in the figure.
4
Use and maintenance