Brandt BIS1224FS Manuel D'instruction page 38

4. Open appliance door and wooden door together and mark the position of slider when the
slider can function well at all angle during door closes or opens. Take slider out of guide
and fix slider with wooden door by two short screws. Then fix slider cover onto the slider.
5. Unscrew the guide from appliance door.
6. Repeat step 2 to 5 fix other three sliders and covers.
7. Fit two guides with sliders and fix them with short screws. Then fix guide covers with
guides.
8. Double check the door can close and open smoothly and appliance is sealed well. If not,
slightly adjust the unit. Then fix bottom bracket with wooden cabinet by 2 long screws.
9. Fix top bracket with wooden cabinet by short screws.
10. Attached rubber seal to the gap between unit and wooden cabinet at door open side.