Fritz! 1200 AX Guide De Démarrage Rapide page 20

Setting Up the Wi-Fi Connection
Action
Plug the FRITZ!Repeater into an electrical outlet near the FRITZ!-
1
Box.
2 Wait until the LED starts flashing slowly.
Start the connection on the FRITZ!Repeater: Press the Connect
3
button. The LED flashes rapidly.
Start the connection on your FRITZ!Box:
• FRITZ!Box with Connect/WPS, Connect or WPS button: Press
button briefly The WLAN or Connect LED flashes.
4
• On a FRITZ!Box with the WLAN/WPS or WLAN button: Press the
button for about 6 seconds until WLAN starts flashing.
• On another wireless router: press the button that starts WPS.
As soon as the LED on the FRITZ!Repeater lights up permanently,
the connection has been established.
5
If the LED on the FRITZ!Repeater starts flashing slowly again,
repeat steps 3 and 4 of these instructions.
When the connection has been established, move the FRITZ!Repeater to the
desired location.
If the Wi-Fi connection cannot be established at the touch of a button, you
will find alternative instructions in the PDF manual at en/avm.de/service.
20
Continue reading on page 22.
Illustration
Connect/ WPS
innerhalb
von
2 Minuten