Sangean PR-D18 Mode D'emploi page 9

Operating your radio - Search tuning AM / FM
. Fully extend the antenna above the radio. Press the Power button
to switch on your radio.
2. Press the Band button to select the required band.
3. Press and hold the Tuning up/ down button to start the search
tuning. Your radio will scan in an upwards direction (low frequency
to high frequency) or downwards direction (high frequency to low
frequency) and stop automatically when it finds a station of
sufficient strength.
4. To find other stations, press and release the Tuning Up / Down
buttons.
5. Adjust the volume by pressing the Volume up/down button to the
required setting.
Note:
() FM stereo is only available when using headphones.
(2) To see time or frequency on the screen, press the Display button.
8