Error Messages Recap - AMIX SNA 70 Manuel Utilisateur

Events possible on SNA70 :
A ) Events embedded on the software

System initialization

Equipment power supply cut

Hood opening

Hood closing

Sensor link problem

End of sensor link problem

Sensor level problem

20 dB regulation overrun

End of 20dB regulation

C AP60 standardization

Windows opening

Window closing

Settings Modification

Configuration Modification

Automatic time change
B ) Events displayed on SNA70 screen :

Sensor link default

T ransmission to PC
AMIX

ERROR MESSAGES RECAP


event occurring during power on.

event occurring during power cut.

event occurring when opening one of the two hoods.

event occurring when closing one of the two hoods.

event occurring when a default is detected on the sensor link
(broken wire, disconnected plug...).

event when the sensor is coming back to normal

event occurring when the sensor test level is different of the calibration one
(sensor masked ...).

occurs when regulation overrun 20dB.

overrun occurs when overrun returns under 20dB.

occurs when the standardisation is run (To be done at least once a year). Only
in french version.

occurs when a door or window is open.

occurs when a door or window is closed.

occurs when an internal parameter is modified
 occurs when an historic or analysis filter is modified

occurs after an automatic time change of the equipment.

occurs on a sensor link default (broken wire, disconnected ...).

occurs when data are send to PC.
38
.
.
.
SNA 70