Installation And Safety - AMIX SNA 70 Manuel Utilisateur

SNA70 is conformed to norms following :
EN60065, EN55013, EN55020, EN60555-2, and EN60555-3 according to the Directives 73/23/EEC, 89/336/EEC and 93/68/EEC
SNA70 fully complies the decree 98-1143 issued 15 December 1998.
1°) FIXING
 SNA70 UNIT
Fix SNA70 by openings X, Y, Z (see page 6), directly on wall.
Dimensions :
 SNA70 RACK
Fix SNA 70 in a 19 inches cabinet (3U)
2°)
AERATION
 SNA 70 UNIT
 SNA 70 RACK
Install in a well ventilated place, and out of liquids streams
Never expose SNA 70 R to rain snow or moisture.
Avoid high temperature exposure
 Do not lock the vents.
Do not put things on the equipment.
 ATTENTION : Absolutely leave a 1 U minimun (44 mm) free space over the equipment.
 As far as possible leave also 1U at the same space under the equipment.
AMIX

INSTALLATION AND SAFETY

220 mm
Install in a well ventilated place, and out of liquids streams.
For easier areation, fix SNA70 in vertical position wall.
 Do not lock the vents.
 Do not put things on the equipment.
 Forsee a 50 mm free space over the equipment
 Avoid high temperature exposure.
 Never expose SNA70 to rain snow or moisture.
4
230 mm
SNA 70