Functioning Mode - AMIX SNA 70 Manuel Utilisateur

A / COMMON PROCEDURE:
 Enter password
1 - Enter password using of numerical keyboard.
2 -
ENTER
Remark : if the key
1°) Changing password:
3 - Select page 4 using of
1
4 - Select
5 - Enter the new password then validate by pressing on
6 - Enter second time the new password then validate by pressing on
7 -
ENTER ENTER
Remark : if the key
Attention :
 If the two codes are different, the current password is not modified.
 If the code is false, you can try again.
 At any time during password modification, the key ESCAPE restart the full procedure.
2°) Forgotten password:
When SNA70 requires the password :
1- Press the key
2- A masked password is displayed.on screen of SNA70.
3- Contact our technical department. From the masked password, we will be able, under certain conditions, to give you the
associated password.
 Time setting
1 - Select page 3 using of
2 - Select the time parameter to modify (see list ).
3 - Enter using of numerical keyboard the new value wanted
4 -
ENTER
Remark : if the key
AMIX

FUNCTIONING MODE

to validate password
ESCAPE
is pressed, it necessary to restart edition from step 1 and start again the operation.
1052 must be modified by the fitter
The password
PAGE
4
again and the password is modified
is pressed, it necessary restart edition from step 3 and start again the operation.
ESCAPE
PAGE
1
PAGE
3
to save the new value or ESCAPE
is pressed, it necessary restart edition from step 2 and start again the operation.
ESCAPE
From factory password is 1052
(
ENTER ENTER
to cancel
26
)
ENTER ENTER
1  Minute setting (0 to 59)
2  Hour settings (0 to 23)
3  Day settings (0 to 31)
5  Month settings (1 to 12)
6  Year settings (00 to 99)
SNA 70