ProMed 1020 Instructions D'utilisation page 16

G s
ettinG tarted
DE
A. Socket for the power cord
US
B. Socket for the handpiece cable
FR
C. Grinding head holder
IT
D. ON/OFF switch
ES
E. Speed controller
NL
F. Rotation direction switch + standby
RU
G. Holding device for the handpiece
PL
SE
FI
Please position the station onto 0 or switch it off before changing
the grinding head.
1. Turn the knurl in an anticlockwise direction. The chuck opens.
2. The grinding head can be changed.
3. Following this, turn the knurl in a clockwise direction. The
chuck closes and fixates the grinding head. Switch the unit on
again for operation.