Section 6. Replacement Parts - Polaris P93 Guide Du Propriétaire

5.4 Replacing the Tires on the Cleaner
1. Pull on the inside of the old tire to remove the
tire lip from the wheel. See Figure 35.
Figure 35. Pull the Old Tire Over the Wheel
2. Remove the old tire as shown in Figure 36.
Figure 36. Remove the Old Tire
3. To replace the tire, position the tire on the wheel
making sure to orient the tire so that the word
INSIDE is toward the body of the cleaner. See
Figure 37.
1
Towards
Body
Figure 37. Tire Replacement Orientation
4. Push one side of the tire on to the wheel and fit
the rib of the tire in the groove of the wheel as
shown in Figure 38.
1
2
Figure 38. Start on One Side of the Tire
5. Work the tire onto the wheel and verify the
rib of the tire is positioned properly within the
groove of the wheel. Refer to Figure 39
Figure 39. Work the Tire On Around the Wheel
6. Push and position the rib of the inner side of
the tire in the groove of the wheel. Refer to
Figure 40. If needed, turn the wheel gently to
help with installation.
Figure 40. Push the Tire into Place on the Wheel

Section 6. Replacement Parts

The complete replacement parts list and exploded
view is available on the Polaris website at
www.polarispool.com.
Page 13
2
3
4