Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
4 Port HDMI
Quad Multi-Viewer
TM
Item no. 1642716
Intended use
The product is used to connect up to four devices with HDMI compatible output to the HDMI
compatible input of a playback device. The pictures on all four devices can be shown at the
same time on the connected playback device.
Only the power unit enclosed may be used to supply power. The power unit is only approved
for connection to 100-240 V~/50/60 Hz alternating current.
The product may only be used in enclosed indoor locations; no outdoor use is permitted. Do
not expose to moisture, under any circumstances.
For safety and approval reasons, you may not convert and/or alter the product in any way. If
you use the product for other purposes than those described above, the product may be da-
maged. Furthermore, improper use may cause risks such as short-circuits, fire, electric shocks,
etc. Please read the operating instructions carefully and do not discard them. Please include
these operating instructions if you pass the product on to a third party.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Package contents
• Quad Multi-Viewer
• Power adapter
• Remote control, including battery
• 4 rubber feet
• 2 mounting angles with screws
• Adapter plug for RS232 interface
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of perso-
nal injury, such as electric shock.
An exclamation mark inside a triangle indicates important instructions in this opera-
ting manual which must be adhered to without fail.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/material
damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General notes
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly leave the packaging material lying around. It may become a
dangerous plaything for children.
• The mains unit complies with safety class II and may only be operated from the
public power supply.
• Never touch the power unit with wet or damp hands. There is danger of a life-
threatening electric shock!
• Never replace a damaged connecting cable of the power unit. If the connecting
cable is damaged, the power adapter is unusable and must be disposed of. Re-
pairs are not permitted.
• In order to disconnect the unit from the power system completely the power supply
must be disconnected from the power socket.
• Never pour fluids above electrical devices. Do not place any containers with li-
quids, such as buckets, vases or plants, on or in the immediate proximity of the
product. Liquids could get inside the unit and thus impair electrical safety. There
is danger of fire or a life-threatening electric shock! If liquid is spilled into the unit,
switch off the respective mains socket (e.g., switch off automatic circuit breaker
and FI circuit breaker) and unplug the power adapter from the socket. The product
may no longer be operated Take it to a specialist workshop.
• Do not place open flames, such as burning candles, on or near the device.
• Use the device only in temperate climate regions and not in tropical ones.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations
and combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- shows visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• Please handle the product with care. It can be damaged by impact, blows, or by
being dropped, even from a low height.
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• If you have doubts about how the equipment should be operated or how to safely
connect it, consult a trained technician.
• Maintenance, adjustment and repair work should only be carried out by an expert
or a specialised workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
b) Batteries
• Make sure that the polarity is correct when inserting the battery.
• Remove the battery from the remote control if you are not going to use the device
for a while, to prevent damage caused by leaking. Leaking or damaged batteries
can cause acid burns upon contact with the skin. Therefore, you should wear
protective gloves when handling damaged batteries.
• Keep them out of the reach of children. Do not leave batteries lying around. There
is a risk that the batteries may be swallowed by children or pets.
• Do not dismantle batteries, do not short-circuit them or throw them into a fire.
Never charge conventional, non-rechargeable batteries. There is a danger of ex-
plosion!
Parts and controls
1 Power unit connector
2 Power indicator
3 HDMI output
4 RS232 interface
5 AUDIO button
6 MODE button
7 IR receiver
8 Display for HDMI inputs
9 HDMI inputs
Publicité
