Front Panel - Ramiaudio PRT666 Manuel Utilisateur

FRONT PANEL

1 - Balanced microphone input on XLR with phantom power supply (sensitivity adjust from
the rear panel)
2 - Led peak indicator for microphone input.
3 - Fugitive key « ON/OFF » with back light. Internal flip flop memorises the state. Reset by an other
push.
According to the internal jumpers it allows :
 send a GPO, to control the remote console module.
 to turn on (or not) the
 to mute (or not) the microphone to the line output.
4 - Balance adjust
5 - Headphone output level control.
6 - 1/4" stereo headphone plug.
7 - ON AIR perspex window with backlight. According to the internal jumpers it is controlled:
 either internal by
 or external by the remote console.
8 - TALKBACK 2 key.
 send the microphone signal at line level to TALKBACK 2 output.
 an opto coupleur GPO loop is associated to the key (to send order to the remote console)
According to the internal jumpers, the key mute or not the microphone main output
9 - TALKBACK 1 key.
 send the microphone signal at line level to order 1 output.
 an opto coupleur GPO loop is associated to the key (to send order to the remote console)
According to the internal jumpers
 the key mute or not the microphone main output.
 pressing Order 1 key activates the same action on TALKBACK 2.
Rami
1
2
3

ON AIR indicator.

.
14
4
5
6
7
8
9
A
PRT666
on