Front Panel - Ramiaudio AUF300 Manuel Utilisateur

FRONT PANEL

CHANNEL A
1 - Multi-turn cermet potentiometer for sensitivity calibration on left or right level of channel A
Variable from +12 dBu to -10 dBu. The sensitivity (gain of input level) increases
clockwise.
2 - Multi-turn cermet potentiometer for VCA rising time calibration of channel A (fade in time
from 0 to 100% of the audio modulation). Variable from 0 to 4 seconds. The time increases
clockwise.
3 - Multi-turn cermet potentiometer for VCA falling time calibration of channel A (fade out time
from 0 to 100% of the audio modulation). Variable from 0 to 4 seconds. The time increases
clockwise.
4 - Multi-turn cermet potentiometer to reduce the channel A when this one is closed (channel B
open). The reduction increases clockwise. Adjustable from 4 dB to 96 dB.
Attention, the attenuation A is valid only when the channel B is ON; the modulation A being
completely cut off if you switch to channel C.
5 - Warning light indicating that A channel is open (audio proceeding).
Note: the VCA is an electronic component with the gain determined by a continuous voltage.
(Voltage Controlled Amplifier)
RAmi
1 2 3 4 5
The channel A is attributed to the
general modulation.(Satellite channel,
output deck, automatic external musical
program).
20 AUF 300