Publicité
EXISTING SURFACE INSTALLATION
NOTE: For cabinets with electrical options, turn breaker off before beginning.
NOTE: Remove door from cabinets before beginning.
1. Remove four screws holding each side kit to the cabinet box and save for side kit reinstallation.
2. Remove side kits and set aside in a safe location.
NOTE: Proceed to previous section, NEW INSTALLATION: PL / M / PC / DC / AC / YC (p. 6).
1
2
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
9
Part no. 209-1313 04/20/2021
IQ Digital Lock Box
Publicité
Chapitres
