Drawer Removal/Installation; Drawer Divider Installation - Robern CRAFT Serie Mode D'emploi

DRAWER REMOVAL/INSTALLATION

Drawer Removal
1. Reach under the drawer and squeeze the orange handles of both locking devices.
2. While holding the handles, pull the drawer straight out and lift it off the runners.
Drawer Installation
1. Place drawer on the runners (either extended or retracted) and close.
2. The locking devices will automatically engage with the runners. Open drawer completely to confirm that both locking devices have
engaged.
Removal
DRAWER DIVIDER REMOVAL/INSTALLATION
These instruction steps are only applicable for vanities that ship with glass drawer dividers:
1. Align glass drawer divider with slots at the front and back of vanity drawer.
2. Firmly and evenly press down on the glass drawer divider until it is all the way down and touching the base of the drawer.
1
© 2021 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
Installation
5
Part no. 209-1416 07/21/2021
Craft Series & Curated Bath Vanity