GE GTMS855EDMC Mode D'emploi page 8

About the dryer features.
Sensor Dry
Time Dry
Steam Cycle
Two back legs on the
rear wall angled ledge
Secure front two inner straight
legs into the oval holes on both
sides of the lint filter handle
8
This feature is activated in all but the Timed
(Timed Dry & Quick Fluff) and Steam (Steam
Refresh & Steam Dewrinkle) cycles .
The Sensor Dry provides greater drying
accuracy than standard machines, resulting
in shorter dry times and better clothes care .
As the clothes tumble, they touch a moisture
sensor . The sensor will stop the heating cycle
as soon as the clothes have reached the
selected dryness .
This feature is activated in Timed Dry & Quick
Fluff cycles . The time (10, 20, 30, 40, . . . 80, 90,
99) is specified via the Time button .
This feature is activated in Steam Refresh &
Steam Dewrinkle cycles . Use STEAMselect to
indicate the number articles .
Drying Rack (on some models)
A handy drying rack may be used for drying
delicate items such as washable sweaters .
Hook the rack over the lint filter so the rack
extends into the dryer drum .
NOTE:
n The drying rack must be used with the
Timed Cycle .
n Do not use this drying rack when there are
other clothes in the dryer .
Stainless Steel Drum
The stainless steel used to make the dryer drum
provides the highest reliability available in a GE
dryer . If the dryer drum should be scratched
Drum Light
The drum light is an LED light . Replacement must
be done by a qualified technician .
This dryer will adjust the initial estimated
drying time of the sensor dry cycles as it
"learns" its installation and usage profile .
Please allow several weeks for the dryer to
customize itself to "you" .
To use the drying rack:
1
Insert the drying rack into the dryer
opening with the two leg side toward the
back and four leg side toward the front .
2
Place the two back legs on the rear wall
angled ledge .
3
Secure front two inner straight legs into
the oval holes on both sides of the lint
filter handle .
NOTE: Rotate the dryer drum by hand
clockwise to make sure the baffles clear the
rack .
or dented during normal use, the drum will not
rust or corrode . These surface blemishes will not
affect the function or durability of the drum .