Control Panel - AEG FSB52620Z Notice D'utilisation

28 www.aeg.com
Salt container
5
Air vent
6
Rinse aid dispenser
7
Detergent dispenser
8
3.1 Beam-on-Floor
The Beam-on-Floor is a light that is
displayed on the floor below the
appliance door.
• When the programme starts, a red
light comes on and stays on for the
duration of the programme.
• When the programme is completed, a
green light comes on.
• When the appliance has a
malfunction, the red light flashes.

4. CONTROL PANEL

1
On/off button
1
Display
2
Delay button
3
Programme button (up)
4
Programme button (down)
5
4.1 Indicators
Indicator Description
Rinse aid indicator. It is always off while the programme operates.
Salt indicator. It is always off while the programme operates.
Cutlery basket
9
Lower basket
10
Upper basket
11
The Beam-on-Floor goes off
when the appliance is
deactivated.
When AirDry is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
see if the cycle has ended,
check the control panel.
2 3 4 5
TimeSaver button
6
XtraDry button
7
RESET button
8
Indicators
9
6 7 8 9