Hama MyVoice2100 Mode D'emploi page 7

6. Bluetooth pairing
®
Note - pairing
• Ensure that the Bluetooth
activated .
• Please refer to the operating instructions of your device for more information .
The headset and the device should not be more than 1 metre apart .
The shorter the distance, the better .
Switch the headset on using the On/Off switch (1) .
Check the status of the status LED (3) and the announcements
1
Red/blue „Pairing"
blue
„Connected"
® -enabled device is switched on and that the Bluetooth
If the LED (3) is flashing quickly and the announcement is:
Headset searching for a Bluetooth
If the LED (3) is flashing slowly and the announcement is:
The headset is already paired with a Bluetooth
® function is
connection .
®
device .
®
7