Publicité
Les langues disponibles
Les langues disponibles
Set up / Washing option
(only for the Aqua Xpert S250 model)
1. Press the button on the dust pan to
2. Install the mop on its base.
remove it from the robot.
3. Place the mop base on the water tank.
4. Fill the tank with water. You can add a
few drops of cleaning solution.
6. Start the robot by pressing directly on your
5. Place the trays in the robot.
robot, on your remote control or via your
application.
Caution:
1. Water flow adjustment can only be done via the remote control or the app if the mop base has been properly
installed. Otherwise, the adjustment cannot be made.
2. It is not recommended to use your mop on carpets or rugs.
3. When you have finished cleaning, it is recommended that you rinse your water tank to prevent it from
becoming moldy.
Publicité
