Publicité
Les langues disponibles
Les langues disponibles
EN
20
CLEANING AND CARE
Cleaning
•
Unplug your power cable for your safety before cleaning your appliance.
•
Take out the front grid wire through the inlets on the frame using a slotted
screwdriver.
•
Make sure that the power is off for your safety. Power cable plug must be
unplugged.
•
The reflector and filament must be cleaned with a soft cloth, a smooth
brush or cool or dry air. The cloth may be damp but never too wet and the
cleaner should not include any chemical.
•
Refrain from using cleaning material likely to damage the reflector
(cleanser etc.).
•
Insert the wire grid using a slotted screwdriver.
Care
•
Check the cleanliness of the Reflector and IR-Filament at least once a
month. If necessary, apply cleaning and maintenance instructions.
•
The number of checks may be increased considering the amount of the
dust in the environment.
•
Check the deformation of the Reflector, Wire and Frame visually while
cleaning the appliance. In case of any deformation, consult a qualified
technician.
•
Check the power cable and plug visually while cleaning the appliance. In
case of any deformation, consult a qualified technician.
•
It is recommended to change the reflector every 2 years for more efficient
operation.
Publicité
