Publicité
Les langues disponibles
Les langues disponibles
Rear Burner Conversion
Tools required:
Steps：
1.
Remove the two screws securing the rotisserie heat shield from inside the firebox. Remove three securing
screws and drop off the Rear Baffle from the back of the grill.
2.
Remove the (Liquid Propane) orifice with 6mm wrench.
3.
Replace with 1.84MM NG orifice with 6mm wrench. Then put rear baffle and screw back into the original
position.
PDF 文件使用 "pdfFactory Pro" 试用版本创建
Natural Gas Conversion for Model# 720/730-0830
Phillips Head Screwdriver (+)
6mm Wrench
www.fineprint.cn
38
Publicité
Chapitres
Dépannage
