Publicité
Les langues disponibles
Les langues disponibles
Main Tube Burner Conversion
Tools required:
Steps：
1.
Remove the warming rack, cooking grids, and flame tamers.
2.
Remove the main tube burners by removing the pin securing the burners near the back wall of the firebox
and the screw near the front of the firebox that secures the igniter bracket to the burner. Gently lift the tube
burners up and out.
3.
Remove LP (Liquid Propane) orifice with 6mm nut driver for each of the main burners, and replace with
1.77mm NG orifice by hand (4 main burners).
4.
Replace the tube burners and screw back into original position.
37
PDF 文件使用 "pdfFactory Pro" 试用版本创建
Natural Gas Conversion for Model# 720/730-0830
Phillips Head Screwdriver (+)
6 mm Nut Driver
www.fineprint.cn
Needle nose
pliers
Publicité
Chapitres
Dépannage
