GreenWorks 2600202 Guide D'utilisation page 16

OPERATinG inSTRUCTiOnS
STARTING THE SNOW THROWER
W A R N I N G
Avoid accidental start-ups. Verify that the operator is in the starting position when using the snow
thrower. In order to avoid serious injury, the operator and unit must be in a stable position when
starting the snow thrower.
POWERING ON AND OFF (See Figure 9)
• To power on, first press the safety switch button (1).
• While pressing the safety switch button with one hand, use your other hand to simultaneouly
pull the bail switch (2) toward you. Once the machine powers on, release the safety switch
button and proceed with operation. The snow thrower can only be started by pressing the
safety switch button first, followed by squeezing the bail switch; reverse operation will not start
the machine.
• To power off, release your grip on the bail switch.
NOTE: A high-pitched noise and sparking may occur as the electric motor decelerates. This is normal.
c A U T I O N
Do no attempt to override the operation of the bail switch.
1
2
16
Fig. 9