GreenWorks 2600202 Guide D'utilisation page 12

Masquer les pouces Voir aussi pour 2600202:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ASSEMBLY inSTRUCTiOnS
W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious injury.
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
ASSEMBLING THE HANDLE (See Figure 3)
• Align the holes (4) on the middle handle (2) and the lower handle (3). insert the bolts (5), and
use the handle knobs (6) to tighten them.
• Align the hole (7) on the middle handle (2) and the upper handle (1). insert the cam locks (8)
and tighten them with the handle knobs (9) provided. Once tightened, close the cam locks to
secure them in place.
NOTE: If the upper handle is loose or separated from the middle handle, tighten the cam lock handle knobs
by turning them clockwise. Do not overtighten the handle knobs.
1
2
9
3
6
4
12
8
7
5
Fig. 3

Publicité

Table des Matières
loading

Table des Matières