Ribiland PRMPP063 Manuel D'instructions page 18

II. CHARACTERISTICS
Description
Reference
Model / Type
Self priming water
pump
Engine
Unit
Symbols
Suction port diameter (mm)
Max displacement (L/min)
Max head (m)
Max suction head (m)
Model
Type
Max power
Displacement
Fuel-lube system
Fuel tank capacity (L)
Starting system
Spark plug type
G.W.(kg)
Outline dimensions
(L×W×H) (mm)
Do not expose to weather conditions (ex.: storm, rain, snow ...) or moisture.
Do not use during weather conditions.
Caution! Risk of injury and/or damage and/or deterioration of product in
case of non compliance to safety requirements.
Read the instructions manual.
Make sure all users read the instructions.
Keep this manual for future reference
Wear protective equipment (face shield or goggles, ear protection)
Wear protective gloves and boots.
Never operate this tool or any other power equipment if you are tired, ill, or
under the influence of alcohol, drugs, or any substance that could affect your
ability or judgement.
Danger: Fire!
Mixture is inflammable. Do not spill!
Keep away from naked flames. Do not smoke. Do not spill fuel.
Never attempt to refill while the motor is running or hot!
Warning! Hot surfaces!
During operation and for a certain time after the machine has been switched
off, cylinder, motor casing etc. will be hot.
Do not touch them until they have cooled down. You risk getting burned.
Water Pump 63 cc
PRMPP063 / 518591
LTEP40
40 (1.5inch)
300
28
7
1E45
2-stroke,
single-cylinder
1.15kW at 3600rpm
63cc
Fuel-oil mixture (ratio 50:1)
1.6
Recoil starter
F6RTC or similar
16
321×380×313
- 15 -
air-cooled,