General Safety Instructions; Purpose - Calira EVS 17/16-DS/IU Mode D'emploi

General safety instructions

The following important safety instructions must be
observed when using electric devices, as protection
against electric shock, injury and fire hazard. Please read and
follow these instructions before using the device.
Setting up
Please ensure that the device is placed securely and cannot
fall down or tip over. Always position cables so that nobody
can trip over them. Do not expose electric devices to rain. Do
not operate electric devices in a damp or humid environment.
Do not operate electric devices in the vicinity of flammable
liquids or gases. Place electric devices so that children do not
have access to them.
Protection against electric shock
Only operate devices whose housing and cables are undam-
aged. Ensure safe cable positioning. Do not pull cables.
Safeguard the electric connection of the devices with a
30 mA-rated leakage current circuit breaker, and only
operate it with this protection. Observe the power supply
companies regulations.
Use
Do not use electric devices other than for the purpose speci-
fied by the manufacturer.
Accessories
Only use accessories and supplementary devices supplied or
recommended by the manufacturer.
20

Purpose

The power supply is a combination of an automatic charger
and an automatic battery separator. It serves for current
distribution and for charging 12 V lead batteries with a battery
capacity of 50 to 160 Ah consisting of six separate cells
(e.g. car battery). The 230 V circuit breaker replaces the 230 V
input fuse.
The power supply is universally usable and designed for per-
manent operation. It is particularly suitable for use in campers.
The recommended use is with AGM / gel batteries. The power
supply must only be operated in dry spaces.