IKEA MOJLIG Manuel D'utilisation page 10

ENGLISH
Rating Plate
Made In Italy
© Inter IKEA Systems B.V. 1999
502-371-42
21552
PQM
PNC. 949738211 TYPE H3VF1TC0-G/VI
ZO 0694
The graphic above represents the rating
plate of the appliance (without serial num-
ber which is generated dynamically during
the production process), which is located at
its underneath surface of the casing.
Installation
Warning! This appliance must be
installed, connected or repaired only
by a registered competent person to the
relevant gas standard. Use only parts
provided with the product. Use only original
spare parts.
Manufacturer is not responsible for any in-
jury to persons and pets or damage to
property caused by failure to comply fol-
lowing requirements.
Caution! To proceed with the
installation refer to the assembly
instructions.
Warning! Installation process must
follow the laws, ordinances, directives
and standards (electrical safety rules and
regulations, proper recycling in accordance
with the regulations, etc.) in force in the
country of use!
G20 20 mbar = 3.8 kW
G20/G25 20/25 mbar = 3.8 kW
G30 28-30 mbar = 276 g/h
G31 37 mbar = 271 g/h
G30/G31 30/30 mbar 276 g/h
G130 8 mbar = 3.7 kW
Dear Customer, please apply here aside
the sticker you can find in the dedicate
plastic bag inserted inside the hob packag-
ing. This will allow us to assist you better, by
identifying precisely your hob, in case you
will need in future our assistance. Thank you
for your help!
Ensure that the local distribution condi-
tions (nature of the gas and gas pres-
sure) and the adjustment of the appliance
are compatible before proceeding with the
installation.
The parameters of adjustment setting
for this appliance are stated on the
rating plate (refer to the Technical data
chapter).
Warning! The appliance must be
earthed!
Warning! Risk of injury from electrical
current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• Loose and inappropriate plug and socket
connections can make the terminal over-
heat.
• Have the clamping connections correctly
installed.
• Use strain relief clamp on cable.
10
II2H3+ (IT-ES-PT)
III1c2E+3+ (FR)
II2H3B/P (BG-CZ-HR-RO-SK-TR)
~
230 V 50 Hz