Putting Out Of Operation; Maintenance And Cleaning - Abicor Binzel FES-200 Mode D'emploi

8 Putting out of operation

8 Putting out of operation
 Fig. 6 Operating elements on page EN-15
1 Set the rocker switch (2) on the fume extraction system to the 0 position.
2 Disconnect the system from the mains by unplugging the mains plug from the socket.
NOTICE
• If the voltage circuit breaker (4) triggers, press it back in again.

9 Maintenance and cleaning

Scheduled maintenance and cleaning is a prerequisite for a long life and a trouble-free operation.
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair work, the following instructions
must be adhered to:
• Switch off the power source.
• Close off the compressed air supply.
• Pull the mains plug.
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• Before performing any maintenance and cleaning work, the necessary safety measures must be
• Maintenance and cleaning work on the fume extraction system may only be carried out in areas with
• Maintenance and cleaning work may only be carried out by qualified personnel (in Germany see
• Always wear your personal protective equipment when performing maintenance and cleaning work.
• The personal protective equipment includes protective clothing, safety goggles, respirator mask
EN - 16
DANGER
WARNING
taken.
locally filtered forced ventilation.
TRBS 1203).
class P3, protective gloves and safety shoes.
FES-200