Establishing The Electrical Connection En; Operation; Operating Elements En - Abicor Binzel FES-200 Mode D'emploi

FES-200
6.3 Establishing the electrical connection
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
Mains cable and mains plug are pre-mounted. For the mains voltage and the fuse protection, please refer to:
 3.1 Technical Data on page EN-7
 3.3 Nameplate on page EN-8
1 Plug in mains plug.

7 Operation

• Provide sufficient ventilation during operation of the extraction system FES-200.
 Fig. 6 Operating elements on page EN-15
1 Plug the mains plug into the socket.
2 Set the rocker switch (2) on the fume extraction system to the Manual position.
7.1 Operating elements
1
5
1
Manometer
2 Rocker switch
Fig. 6 Operating elements
WARNING
CAUTION
3
Connection of mains connecting cable with plug
4 Voltage circuit breaker
2
3
4
5
Star-stop pliers connection (7/4-pole)
7 Operation
EN - 15