Configuring The Ethernet - Hella Gutmann mega macs X Guide De Démarrage Rapide

Hella Gutmann
ð The name of the selected wireless network is displayed under Connected wireless network
ð Use
to call up detailed information about the connected wireless network.
10. Once the Wi-Fi symbol
Internet.
ð You can use the Wi-Fi connection now.
5.1.1.2. Resetting the Wi-Fi Configuration
You can reset the Wi-Fi configuration if you wish to remove the automatic connection between diagnostic device and al-
ready created wireless network.
Proceed as follows to delete all known wireless networks:
1. Select > Settings.
2. Select >Device<.
3. Select >Wi-Fi<.
4. Select .
5. Click to >Reset Wi-Fi configuration<.
ð The Wi-Fi configuration is reset.

5.1.2. Configuring the Ethernet

Make your network settings here.
Proceed as follows to connect the diagnostic device to a network (router) via Ethernet interface:
1. Plug in the Ethernet cable (not included in delivery contents) in the Ethernet ports of the mega macs X and the Ether-
net remote station.
2. Select > Settings.
3. Select >Device<.
4. Select >Ethernet<.
5. Open the list under IP address mode with
ð If >Determine automatically (DHCP)< (recommended) is set, the DHCP server of the network will assign an IP
address to the mega macs X automatically. This option is set ex works.
ð If >Determine manually< is selected, enter a free network IP address, e.g. 192.168.246.002. under IP ad-
dress.
6. Select >Determine automatically (DHCP)< (recommended) or >Determine manually<.
7. Click to >Connect<.
ð The selection will be saved automatically.
ð You can use the Ethernet connection now.
mega macs X
appears in the top toolbar, the online connection is set up between diagnostic device and
.
Configuring the mega macs X | 5.
55