Hella Gutmann
2. User Information
2.1. Safety precautions
2.1.1. General Safety Precautions
• The diagnostic device is intended for use on motor vehicles only. It is a precondition for the use of the diagnostic de-
vice that the user has knowledge of automotive technology and is therefore aware of the sources of danger and risks
in the workshop and on motor vehicles.
• Please read the entire user manual thoroughly and carefully before using the mega macs X.
• All notes given in the individual sections of the instructions apply. All symbols on the mega macs X as well as the fol-
lowing measures and safety precautions must also be observed.
• Furthermore, pay attention to all general instructions from labour inspectorates, trade associations and vehicle man-
ufacturers as well as all laws, legal ordinances and instructions which have to be commonly obeyed by a repair shop.
2.1.2. Safety Precautions – Risk of Injury
When working on the vehicle, there is a risk of injury through rotating parts or rolling of the vehicle. Therefore regard the
following:
• Protect vehicle against rolling away.
• Additionally place gear selector lever of AT vehicles to park position.
• Deactivate the start/stop system to avoid an inadvertent engine startup.
• Connect the device to the vehicle only when ignition is switched off.
• Do not reach into rotating parts while the engine is running.
• Do not run cables near rotating parts.
• Check the high-voltage parts for damage.
mega macs X
User Information | 2.
33