Installation Instructions; Tools, Hardware, Materials - GE Monogram ZIC30GNNII Instructions D'installation

TOOLS REQUIRED
• 5/32" Allen wrench
• Utility knife
• Stepladder
• Bucket
• Level
• Appliance hand truck
• Tubing cutter
• 7/16" open-end wrench
• 1-5/16" open-end wrench
• #2 Phillips screwdriver
• Drill and bit set
• 5/16" socket
• Safety glasses
• Pliers
• 3/8" ratchet
• Torx T-20, T-30 wrench
HARDWARE SUPPLIED
• Anti-tip bracket & screws
• Panel mounting brackets
• Door panel templates- Pub # 31-46543
• Water filter - Part # GSWF
• Drywall Anchors and screws

Installation Instructions

12
MATERIALS REQUIRED
• 1/4" copper water line tubing or GE SmartConnect
Refrigerator Tubing kits
• Water shut-off valve
• Custom panels for fresh food door, freezer drawer
and Convertible drawer
• Velcro w/adhesive if using custom toekick.
FLOORING
For proper installation, this refrigerator must be
placed on a level surface of hard material that is at
the same height as the rest of the flooring. This
surface should be strong enough to support a fully
loaded refrigerator, or approximately 1,200 lbs.
NOTE: Protect the finish of the flooring. Cut a large
section of the cardboard carton and place under
the refrigerator where you are working.
™