Kärcher FC 7 Cordless Manuel Opérateur page 12

Note
For optimal cleaning results, wash the
rollers in the washing machine at MAX
140°F (60°C) before using them for the
first time.
Start working
ATTENTION
Uncontrolled movement
Uncontrolled Movement Can Lead
to Equipment and Material Damage
As soon as the device is switched on,
the cleaning rollers start rotating.
Hold the handle so that the device
does not move by itself.
ATTENTION
Fresh or waste water tank not insert-
ed
Fresh or Waste Water Tank Not In-
serted can lead to Damage to Device
as well as Surroundings.
Before starting the cleaning work,
make sure that the fresh water tank is
filled with water, and the waste water
tank is inserted in the device.
1. Press the ON / OFF switch.
a
a
ON
c
The device switches on.
Cleaning level 1 display for normal
roller speed and amount of water
lights up.
2. Moisten the rollers.
12
b
English
a Press and hold the boost function but-
ton.
b Move the device back and forth
until the rollers are sufficiently
moistened.
3. If necessary, switch to cleaning level
2 with the button for setting the
cleaning level.
a
The roller speed and the amount of
water are increased.
The cleaning level 2 display lights up.
Note
The setting of cleaning level 1 or clean-
ing level 2 depends on the surface to
be cleaned (e.g. wood or stone floor).
The device is set to cleaning level 1 for
the initial start-up.
After an interruption in work or restart-
ing, the last cleaning level setting is al-
ways activated.
4. If necessary, activate the boost func-
tion to clean stubborn soiling (see al-
so chapter General information on
operation).
b