Blumfeldt Dark Wave Stand Mode D'emploi page 22

EN
22
2. Fasten the brackets at the appropriate distance of each other (45-55cm)
(Figure 3).
3. Two other brackets are fastened by the help of fasteners at the
appropriate distance on the wall parallel to the floor (At least 1.8 m from
the floor and at least 0.5 m from the ceiling). (Figure 4).
4. Join the brackets on the heater with the brackets, fastened on the wall,
with the help of figured screw-nuts (Figure 5). Install the heater under
necessary angle (in the direction to the area being heated.