Campbell Hausfeld PW135002 Instructions D'utilisation page 5

Assembly and Preoperation
Always make sure that
the garden hose is turned on before turning on
the pressure washer. Running the pressure washer without water will
damage the pumps seals.
Do not disassemble the lance or gun on this
pressure washer. Replacement parts are not available for the gun or
lance.
PW135002
1. Attach high pressure hose to high pressure outlet (see Figure
6)
2. Attach high pressure hose to gun (see Figure 3).
3. Attach lance to gun, twist and lock. Attach nozzle or
detergent bottle to lance by pressing the Easy Connect
button and inserting into Quick Connect on lance. (see
Figures 4 & 5)
4. Attach garden hose to unit (see Figure 7).
5. Press Easy Connect button while inserting Quick Connect
fitting. (see Figure 3 & 6)
Figure 3 - Attach high pressure hose to gun
Figure 5- Attach nozzle to lance.
Water inlet
Figure 7 - Attach garden hose to unit
Figure 4 - Attach lance to gun.
Figure 6 - Attach high pressure hose
5
Models:PW135002
www.campbellhausfeld.com