Télécharger Imprimer la page

Tristar MX-4174 Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

BEFORE THE FIRST USE
Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V  50/60Hz)
Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
Special safety instructions for this machine
Only operate this machine under supervision.
Do not interfere with any safety switches.
Do not insert anything into the rotating hooks while the machine is working.
Place the machine on a smooth, flat and stable working surface.
Do not insert the mains plug of the machine into the power socket
without having installed all the necessary accessories.
USE
In order to lift the arm, push the latch. The arm will now move upwards.
Remove the mixing bowl by turning it anticlockwise.
Mount the required utensil by inserting the top into the output shaft
and lock it by turning the utensil anticlockwise.
Now fill the mixing bowl with your ingredients.
Install the mixing bowl by turning it clockwise until it is locked.
Lower the arm by using the lift arm and press the arm down.
Insert the mains plug into a properly installed safety power socket.
Switch on the machine by using a speedlevel between 1 and 5
(corresponding to the mixture and accessory which is used).
After kneading/stirring/whisking use the "OFF" button to turn off the
appliance. Then remove the mains plug.
Press the lift arm downwards and the arm will be raised.
The mixing bowl can now be removed by turning the bowl anticlockwise.
Remove the mixture out of the bowl with the help of a spatula.
Clean the parts as described under "Cleaning" .
The appliance will automatic switch to the OFF mode according to the
table below.
Speed Setting
Default Timer
1
90 sec.
2
6 min. 30 sec.
3
9 min.
4
9 min.
5
9 min.
How to remove and install the lid
Install: make sure the lid fits properly in the notches, push and turn it
clockwise
Remove: push and turn it anti-clockwise.
How to remove and install the dough hook, whisk or beater.
Install: make sure the utensil fits properly in the notches of the shaft,
push and turn it anti clockwise.
Remove: push and turn it clockwise.
Multi mixer with bowl
EN
5

Publicité

loading