KIRAMI Original Easy Mode D'emploi page 37

Contents
MACU heater: marine aluminium (AlMg3)
•
Fire grate base 1pc
•
Cast iron grate 1pc
•
L-shaped grate 1 pcs for the top shelf
•
Furnace door with steel air guide
•
Ø75mm rubber hose for connecting the heater 2 pcs
•
Xylan Torx25 self-drilling screws 6 pcs
•
Torx 25 head for drill
•
Hose clamps Ø80-85mm 4 pcs
•
This user manual
•
Necessary tools
You will need a 13mm wrench or similar for fixing the heater to the barrel. And for installation on an
aluminium tub you also need a battery screwdriver where you can use the head supplied.
NOTICE! Minimum water level before fire!
37/87
See page 7!