Switching On And Off; Charging The Battery - Lupine NEO Mode D'emploi

2 // Usage of the Light

Switching on and off:

The light is ready for use when delivered. All you have to do is charge the batte-
ry. Press the button to switch on the light and cycle through the different light
modes. Keep the button pressed to switch the light off.

Charging the battery:

Plug the included Wiesel charger into an outlet and then connect the battery to
the Wiesel.
Version 1:
LED red on: charging
LED green on: battery is fully charged
Version 2:
LED green on: charging
LED off: battery is fully charged
Warning!
This charger is to be used to charge rechargeable Li-Ion batteries only.
It is NOT suitable for charging NiMH batteries!
Do NOT use non-rechargeable batteries. – Risk of explosion!
This charger may be opened ONLY by the manufacturer!
www.lupine.de