Lupine NEO Mode D'emploi page 11

4 // Adjust the lightlevels
The dimmlevels and a couple of other useful functions can be adjusted. Keep the
button pressed and wait till the main light blinks up once a second.
If you release the button, the particular program as shown below is chosen.
Dim levels:
1 0.6W + 7W
2 0.3W + 2.5W + 7W
3 0.3W + 1.2W + 3.5W + 7W
4 Red + 0.3W + 3.5W + 7W
5 Red + 0.6W + 3.5W
6 Low Start on
7 Low Start off
8 Battery high
9 Battery low
10 Alpine SOS
11 SOS
Explanation:
75 + 700 Lumens
35 + 270 + 700 Lumens
35 + 140 + 400 + 700 Lumens
Low redlight, in combination with the diffu-
sor. Good for reading maps.
The light starts on lowest beam
The light starts on high beam
Warning & Reservepower activated early
Warning & Reservepower activated later
Blinks till battery is empty or button pushed
Blinks till battery is empty or button pushed
www.lupine.de
Factory settings