Kenwood TTM610 Serie Instructions page 4

Lightly butter the outside surface of
●
sandwiches and place the filling
inbetween the unbuttered sides. This
helps prevent the outside from
burning. Do not use low fat spreads,
which are not suitable for toasting.
Ensure the food item is evenly filled.
●
Always use food items that are a
●
suitable size for the sandwich cage.
Do not force food items into the
toaster.
1 Plug the toaster into the power
supply, an audible beep will be heard.
2 Place the food item in the sandwich
cage and close.
3 Adjust the slot width to suit the
sandwich cage
Take care not to touch the
fascia panel, it may be hot.
4 Lower the carriage lever
place the sandwich cage into the
slot .
5 Move the browning control to the
desired setting.
6 Select the desired button. The
selected button and cancel button
lights will illuminate, an audible beep
will be heard and toasting will begin.
In order to monitor the progress of
●
the toasting, the sandwich cage can
be lifted up without cancelling.
7 To stop toasting at any stage, press
the cancel button. The toaster will
emit an audible beep to indicate
toasting is cancelled and the button
lights will go out.
8 When toasting has finished the
toaster will emit an audible beep and
the button lights will go out and the
toasting will stop. The food item will
NOT pop up.
9 Leave the toasted food item to stand
for 1 minute inside the toaster before
serving.
10 Remove the sandwich cage, then
open it up and tip the food item onto
a plate.
11 After using, unplug the toaster.
. CAUTION:
and
CAUTION:
The sandwich cage will be
●
very hot, ensure it is placed
on a heat resistant surface
and take care when handling.
Ensure ingredients are piping
●
hot throughout before serving.
Take care when biting into the
●
food items as the fillings can
be very hot.
4